|
|
Digilent offers a full line of FPGA development kits. As a member of Xilinx’s XUP Alliance program, we exclusively use Xilinx's industry-leading FPGAs on our boards, yielding the perfect balance between price and performance. From the entry-level Basys™2 to the high-end Virtex®-5 OpenSPARC Evaluation Platform, Digilent has an FPGA-powered solution for you.
|
|
|
$319.00
ZedBoard Zynq™-7000 Development Board
- Xilinx Zynq-7000 All Programmable SoC (AP SoC)
- Kit includes ISE® WebPACK™ with device-locked ChipScope license
- Onboard USB-JTAG Programming
- 512MB DDR3, 256Mb Quad-SPI Flash, Gigabit Ethernet, HDMI, 8-bit VGA, I2S Audio Codec
$449.00
Genesys™ Virtex-5 FPGA Development Board
- Xilinx Virtex®-5 LX50T FPGA
- Intended for use with ISE or EDK
- USB2 ports providing programming, data transfer, and application hosting
- 256Mbyte DDR2, 32MB Numonyx StrataFlash, Gigabit Ethernet PHY, multiple USB2 ports, HDMI video, AC-97 audio
$199.00
Atlys™ Spartan-6 FPGA Development Board
- Xilinx Spartan®-6 LX45 FPGA
- Intended for use with ISE or EDK
- USB2 ports providing programming, data transfer, and application hosting
- 128Mbyte DDR2, 16Mbyte x4 SPI Flash, Gigabit Ethernet PHY, USB2, HDMI video, AC-97 audio
$119.00
Nexys™3 Spartan-6 FPGA Board
- Xilinx Spartan®-6 FPGA
- Intended for use with ISE, Webpack, or EDK
- Digilent USB2 port providing board power, programming, & data transfers
- 16MB Micron Cellular RAM, 16MB Micron Parallel PCM, 16MB Micron Quad-mode SPI PCM
$99.00
Nexys™2 Spartan-3E FPGA Board
- Xilinx Spartan-3E FPGA (500K or 1200K gates)
- Intended for use with ISE, Webpack, or EDK
- Digilent USB2 port providing board power, programming, and data transfers
- 16MB Micron CellularRAM, 4MB Numonyx StrataFlash, VGA, RS-232, high-speed expansion connector
$59.00
Basys™2 Spartan-3E FPGA Board
- Xilinx Spartan 3E FPGA (100K or 250K gates)
- Intended for use with ISE or Webpack
- Digilent USB2 port providing board power, programming, and data transfers
- VGA & PS/2 connectors
FMC Carrier S6
- Powered by a Xilinx Spartan®-6 LX45 FPGA
- 128 MB DDR2 on-board memory
- High-pin-count FMC socket
- Ideal FMC Host controller board for embedded processor designs
$750.00
Virtex-5 OpenSPARC Evaluation Platform (ML509)
- Equivalent to the Xilinx ML509 board
- Xilinx Virtex-5 FPGA (17,280 Virtex-5 Slices)
- Intended for use with ISE or EDK
- Ships with XUP USB-JTAG Programming Cable
- Large DDR array, Gbit ethernet, USB host, audio / video CODECs
$159.00
Spartan 3E Starter Board
- Xilinx Spartan 3E FPGA (500K gates)
- Intended for use with ISE, Webpack, or EDK
- Xilinx USB circuit for programming
- 64MB Micron DDR SDRAM, 16MB Numonyx StrataFlash, VGA, PS/2, RS-232, 10/100 Ethernet
Spartan 3E-1600 Development Board
- Xilinx XC3S1600 FPGA (1600K gates)
- Intended for use with ISE, Webpack, or EDK
- Xilinx USB circuit for programming
- 256Mbit Micron DDR SDRAM, 128Mbit Intel StrataFlash, ST Microelectronics M25P16 16Mbit Serial Flash, VGA, PS/2, RS-232, 10/100 Ethernet
CoolRunner-II CPLD Starter Board
- Xilinx CoolRunner II CPLD
- Intended for use with ISE or Webpack
- USB 2.0 port for power, programming, & data transfer
- 4 x 12-pin Pmod™ connectors
$499.00
XUP Virtex-II Pro Development System
- Xilinx Virtex-II Pro (30,816 Logic Cells)
- Intended for use with EDK
- Xilinx USB circuit for programming
- DDR SDRAM DIMM socket, Compact Flash socket, 10/100 ethernet, VGA, Audio Codec, High and Low Speed expansion connectors
$699.00
NetFPGA
- Xilinx Virtex-II Pro (53,136 Logic Cells)
- Intended for use with EDK
- Interfaces to standard Gigabit Ethernet using Cat5E or Cat6 copper network cables
- Wire-speed processing on all ports at all time using FPGA logic
Spartan-3 Starter Board
- Xilinx Spartan-3 FPGA (200K or 1000K Gates)
- Intended for use with ISE or Webpack
- Works with Digilent’s JTAG3, JTAG USB, and JTAG USB Full Speed cables, as well as P4 & MultiPRO cables from Xilinx
- 1MB ISSI SRAM, VGA, PS/2, RS-232, three 40-pin expansion connectors
Digilent C-Mod
- Xilinx CoolRunner II CPLD (64 Macrocells)
- Intended for use with ISE or Webpack
- Programmable via Digilent parallel or USB JTAG cable
- Convenient & standard 40-pin DIP footprint
Opus Virtex®-5 Development Board
- Xilinx Virtex-5 FX30T FPGA with embedded PowerPC® core
- Linux 2.6.33 bootable kernel provided on the included 2 GByte SD card
- Intended for use with Xilinx Design Suite: Embedded Edition (ISE and EDK)
- 2 x 128 MB DDR2 memory banks in a 32-bit configuration, 32 MB Platform FLASH
- 8-lane PCI Express connector, 10/100 Ethernet PHY, 40-pin GPIO
|
|
