|
|
Pmods™ are small I/O interface boards that offer an ideal way to extend the capabilities of our FPGA/CPLD and embedded control boards. Pmods communicate with system boards using 6 or 12-pin connectors. Pmods include sensors, I/O, data acquisition & conversion, connectors, external memory, and more.
"Pmod™" is the trademark of Digilent Inc. The Pmod Interface Specification is the property of Digilent Inc. For more information on the use of the Pmod trademark, please see our Pmod License Agreement page.
|
|
|
|
|
PmodCDC1 - Capacitative I/O
- Based on the Analog Devices AD7156 1.8 V, 2-Channel Capacitance Converter
- I2C communication interface
- Two capacitance input channels
- Adaptive proximity threshold
- Ships with a 4-pin to 2x2-pin MTE Cable
PmodDPOT - Digital Potentiometer
- 3-wire SPI communication interface
- 10 kΩ nominal resistance with minimal achievable resistance ≈ 60 Ω
- 256 possible resistance settings
- Ships with a 6" 6-pin cable and a 6-pin header
PmodAMP3 - Stereo Power Amplifier
- Digital input, stereo, 2W, class-D audio power amplifier
- Separate left and right channel 1/8" headphone jacks
- Supports common I2S audio formats
- Digitally configurable volume control for each channel
- Dynamic range control
- Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers.
PmodAMP2 - Audio amplifier
- Filterless, High Efficiency, Mono 2.5 Watt Class-D Audio Amplifier
- Digital gain select
- Pop and click suppression
- Micropower shutdown mode
- 2.5V – 5V operating voltage
- Ships with a 6" 6-pin cable and a 6-pin header
PmodGPS - GPS Receiver
- Satellite positioning accuracy for your designs
- 3 meter 2D accuracy without aid
- Super low power consumption (24mA tracking and 30mA during acquisition)
- Integrated ceramic GPS antenna
- Ships with a 6" 6-pin cable and a 6-pin header
PmodOLED2 - Large 4-bit OLED Display
- 256 by 64 pixel, 4-bit gray scale OLED display
- 5 3/8" x 1 3/8" display area
- Internal display buffer
- Parallel interface
- Up to 10Mhz clock speeds
- Ships with a two 2x6-pin headers and two 6" 2x6-pin cables
PmodOLED - Organic LED Graphic Display
- 128 by 32 pixel 0.9’’ OLED display
- Standard SPI interface
- Clock speeds of up to 10MHz
- Internal display buffer
- Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
PmodWiFi - 802.11b WiFi Interface
- IEEE 802.11-compliant RF transceiver
- Serialized unique MAC address
- 1 and 2Mbps data rates
- IEEE 802.11b/g/n-compatible
- Integrated PCB antenna
- Range: up to 400m (1300 ft.)
- Radio regulation certification for the United States (FCC), Canada (IC), Europe (ETSI), and Japan (ARIB)
- Wi-Fi certified (WFA ID: WFA7150)
- Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
PmodBT2 - Bluetooth Interface
- Bluetooth 2.1/2.0/1.2/1.1 Compatible
- A wide range of modes including: Slave Mode, Master Mode, Trigger Master Mode, Auto-connect Master Mode, Auto-connect DTR Mode, and Auto-connect ANY Mode.
- Simple UART Interface
- Small size: (0.8" x 1.5")
- Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers.
PmodNIC100 - Network Interface Controller
- Standard SPI interface
- IEEE 802.3 compatible Ethernet controller
- 10/100 Mb/s data rates
- MAC support
- 10BASE-T support
- 100BASE-TX support
PmodRF2 - IEEE 802.15 RF Transceiver
- IEEE 802.15-compliant RF transceiver
- Supports ZigBee ®, MiWi™, MiWi P2P and proprietary wireless networking protocols
- ISM band 2.405-2.48GHz operation
- Simple SPI communication interface
- Integrated 20MHz and 32.768 oscillator circuitry
- Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
PmodUSBUART - USB to UART Interface
- USB to serial UART interface
- Option to power the system board through the FTDI chip
- Ships with a 6" 6-pin cable, and a 6-pin header
PmodSD - SD card slot
- Provides an SD card interface for use with Digilent system & microcontroller boards
- Small size (1.75" x 1.75")
- Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
PmodCLP - Character LCD w/ parallel interface
- 16x2 character display
- Parallel data interface
- Simple terminal like display interface
- Measures 3.3" x 2.3"
- Ships with a 6" 6-pin cable, a 6" 2x6-pin to dual 6-pin cable, and appropriate headers
PmodCLS - Character LCD w/ serial interface
- 16x2 Character Display
- Flexible communications using UART, SPI or TWI interface
- Simple terminal-like display interface
- Measures 3.75" x 1.75"
- Ships with a 6" 6-pin cable, and a 6-pin header
PmodIOXP - I/O Expansion Module
- I/O port expander that communicates with a host via an I2C interface
- 16-element FIFO for event recording
- 19 configurable I/Os
- Keypad decoding for matrices up to 11x8
- PWM generator
- Ships with a 10" 4-pin MTE cable
PmodKYPD - 16-Button Keypad
- 16 clearly labeled buttons
- Pull-up resistors for each row
- Simple interface - each row & column given dedicated pins on the Pmod connector
- Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
PmodJSTK - Two axis joystick
- Two Axis Resistive Joystick (CTS 252A103B60NB)
- Joystick also functions as a push button
- Two additional user buttons
- Ships with a 6" 6-pin cable and a 6-pin header
PmodENC - Rotary encoder
- Rotary push-button shaft encoder
- Slide switch with a series resistor
- Small size (1.5" x 0.75")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodSSD - Seven-segment display
- Two-digit high bright seven-segment display
- Small size (0.80" x 0.80")
- Ships with TWO 6" 6-pin cables and TWO 6-pin headers
PmodI2S - Stereo Audio Output
- Stereo D/A converter supports all major audio data interface formats
- Supports 16 to 24 bit audio at multiple sample rates, including 48, 96 and 192 Khz
- 3V-5V operating voltage
- Small size (.8" x 1.15")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodBTN - Push buttons
- Four debounced momentary pushbutton switches
- Small size (1.20" x 0.80")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodSWT - Slide switches
- Small size (1.30" x 0.80")
- Four slide switches
- Ships with a 6" 6-pin cable and a 6-pin header
Pmod8LD
- Eight logic level inputs
- Eight high bright green LEDs
- Small size (0.80" x 1.10")
- Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
PmodLED - High bright LEDs
- Four logic level inputs
- Four high bright red LEDs
- Small size (0.80" x 0.80")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodRS232X - Serial converter & interface
- Transmit and receive data functions
- Optional RTS and CTS handshaking functions
- Small size (1.00" x 1.30")
- Ships with a 6" 6-pin cable, and a 6-pin header
PmodRS232 - Serial converter & interface
- Transmit and receive data functions
- Small size (1.00" x 1.30")
- Optional RTS and CTS handshaking functions (Rev.B)
- Ships with a 6" 6-pin cable, and a 6-pin header
PmodDIN1 - Digital Inputs
- Four digital-input channels
- Input protection diodes
- Four debounce filters
- Small size (0.80" x 0.80")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodTPH2 - 12-pin test point header
- Test points for use with the Digilent 12-pin (2x6) PMod connection protocol
- Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
PmodTPH - 6-pin test point header
- 6-pin test point header
- Small size (1.00" x 0.80")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodDHB1 - Dual H-Bridge
- Two H-Bridge interfaces capable of 1.5A RMS (2A Peak)
- 2-channel quadrature encoder channels for Hall-effect sensors
- Motor voltage can be driven up to 11.8V, with a recommended 10.8V maximum
- Logic input voltage range of 2.5V to 5V
- Two JST 6-pin connectors for direct connection to Digilent motor-gearboxes
- Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
Contact us
for pricing & availability
PmodGYRO2 - 1-axis High Performance Gyroscope
- Simple SPI interface
- ±300°/sec angular rate sensing
- Ultra-high vibration rejection (.01°/sec/g)
- Excellent 16°/hour null bias stability
- Internal temperature compensation
- Continuous self-test
- Ships with a 6" 6-pin cable and a 6-pin header
PmodGYRO 3-Axis Digital Gyroscope
- Standard SPI and I2C interface
- 250/500/2000dps selectable resolutions
- Two customizable interrupt pins
- Power-down and sleep mode
- User configurable signal filtering
- Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
PmodSTEP - Stepper Motor Driver
- Locking, keyed headers for interfacing with both 4 and 6-pin stepper motors
- Signal headers for easy viewing of digital I/O signals from the host board
- Can be powered externally or by the host board
- Signal status & power LEDs
- Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers.
PmodACL2 - 3-Axis MEMS Accelerometer
- Based on the Analog Devices ADXL362 3-Axis MEMS Accelerometer
- Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
PmodACL - 3-axis Digital Accelerometer
- SPI and I2C interfaces
- User-selectable resolution
- Single tap/double tap & free-fall detection
- Activity/inactivity monitoring
- Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
PmodLS1 - Infrared Light Detector
- Four 4-pin headers for interface with reflective or transmissive photo detectors
- On-board sensitivity adjustment
- Four on-board LEDs for monitoring input status
- Works with our IR Reflective Object Sensor Cable Assembly (IRROSC)
- Ships with a 6" 6-pin cable and a 6-pin header
PmodHB3 - H-bridge w/ feedback inputs
- 2A H-bridge circuit for voltages up to 12V
- Two 2-pin screw terminal blocks for connection to motor
- Two feedback channels w/ Schmitt-trigger inputs
- Small size (0.8" x 1.20")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodHB5 - H-bridge w/ feedback inputs
- 2A H-bridge circuit capable of handling up to 12V
- Single 6-pin JST connector
- Two feedback channels w/ Schmitt-trigger inputs
- Small size (0.8" X 1.3")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodOD1 - Open drain output
- 4.1A peak output current (t < 5s)
- 3.0A continuous current (at 25°C), 2.2A continuous current (at 85°C)
- One 6-pin header for input
- Two screw terminal blocks for outputs
- Ships with a 6" 6-pin cable and a 6-pin header
PmodOC1 - Open collector output
- Four output clamp diodes
- 40V maximum voltage
- Small size (0.75" x 0.80")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodTMP2 - Thermometer/thermostat
- Up to 16-bit resolution
- Typical accuracy better than 0.25 °C
- I2C interface with 4 selectable addresses
- 240ms continuous conversion time
- No calibration required
- Ships with a 10" 4-pin MTE cable
PmodMIC - Microphone w/ digital interface
- Inclues preamp, compressor, and A/D converter
- 3V-5V operating voltage
- Small size (0.80" x 1.1").
- Ships with a 6" 6-pin cable and a 6-pin header
Contact us
for pricing & availability
PmodIA - Impedance Analyzer
- Based on the Analog Devices AD5933 1 MSPS, 12 Bit Impedance Converter
- Ships with one 4-pin to 2x2-pin MTE cable, one 1-pin MTE cable, & one 6-pin header & gender changer
PmodR2R - Resistor Ladder D/A Converter
- 8-bit digital to analog conversion at up to 25MHz
- Easy attachment of oscilloscopes to illustrate the data conversion process
- Small size (1.0" x 0.75")
- Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
PmodDA4 - Eight 12-bit D/A outputs
- Based on the Analog Devices AD5628 DAC
- Provides 8 channels of D/A conversion at 12 bits of resolution
- High-speed DSP compatible
- Low power consumption
- Small size (1.25" x 0.8")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodDA3 - One 16-bit D/A Output
- Based on the Analog Devices AD5541A DAC
- Ships with a 6" 6-pin cable and a 6-pin header
Pmod-DA2 - Two 12-bit D/A outputs
- Two National Semiconductor DAC121S101, 12-bit D/A converters
- Two simultaneous D/A conversion channels
- Very low power consumption
- Small size (0.80" x 0.80")
- Ships with a 6" 6-pin cable and a 6-pin header
Pmod-DA1 - Four 8-bit D/A outputs
- Four D/A conversion channels
- Very low power consumption
- Small size (0.80" x 0.80")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodAD2 - 4 channel 12-bit A/D converter
- Up to 4 analog to digital converter channels
- Up to 12-bit resolution
- I2C interface
- On-board 2.048V Voltage Reference
- Ability to choose the reference voltage
- Ships with a 4-pin MTE cable
PmodAD1 - Two 12-bit A/D inputs
- Two 2-pole Sallen-Key anti-alias filters
- Two simultaneous A/D conversion channels at up to one MSa per channel
- Very low power consumption
- Small size (0.95" x 0.80")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodAD5 - 4 channel 4.8 KHz 24 bit A/D converter
- Four differential analog inputs or eight pseudo-differential inputs
- 24-bit resolution
- SPI communication interface
- Fast-settling filter
- Five filter options
- Conversion synchronization
- Two SMA connector inputs
- Ships with a 6" 6-pin cable and a 6-pin header
PmodRJ45 - RJ45 connector (pair)
- Extends the 6-pin connection used by Pmods over greater distances via RJ-45 cable
- Ships with a 6" 6-pin cable and a 6-pin header
PmodCON1 - Wire terminal connectors
- Small size (1.10" x 0.80")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodCON3 - R/C servo connectors
- Screw terminal connector for R/C servo power supply
- Small size (.80" x 1.00")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodCON4 - RCA audio jacks
- Flexible configuration of header pins and RCA jacks
- Small size (0.80" x 1.10")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodPS2 - Keyboard/mouse connector
- Power routing jumpers
- Small size (0.80" x 1.00")
- Ships with a 6" 6-pin cable and a 6-pin header
PmodDIP - DIP to Pmod Adapter
- Allows for the use of Digilent Pmods in DIP sockets and solderless breadboards
- Routes signals from the 12-pin DIP interface to a 2x6 Pmod connector
- Small size (0.5" x 0.7")
PmodRTCC - Real-time clock/calendar
- Real-Time Clock/Calendar with lithium coin cell back-up
- I2C interface
- Multi-Function Pin output that can generate a square wave
- Two available alarms
- Ships with a 10" 4-pin MTE cable
PmodBB - Wire wrap / bread board
- 266 tie point wire wrap area
- Ships with a 170 tie point bread board
- All signals pass through
- Small size (1.5" x 3.5")
- Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
PmodPMON1 - Power Monitor
- Monitor current draws less than 1.058A
- Monitor voltages from 3.16V to 26V on the J3 VIN pin
- DVDD input ranges from 3V to 5.5V
- Standard I2C interface
- Configurable device address allows for up to nine PMON1s in a single system.
- Ships with a 4-pin to 2x2-pin MTE Cable and a 6-pin header
PmodSF2 - Serial PCM, 128 Mbit
- Micron® P5Q PCM
- More than 1,000,000 write cycles
- High program performance with low power
- Small size (0.80" x 1.00")
PmodSF - Serial Flash ROM, 16 or 128 Mbit
- Available with either a 16 or 128Mbit Serial Flash
- Data retention greater than 20 years
- Very low power consumption
- Greater than 100,000 erase/program cycles per sector
- Ships with a 6" 6-pin cable and a 6-pin header
PmodREG1 - Voltage regulator
- 250mA, low dropout linear regulator
- Fixed 3.3V output voltage
- Input voltage range of 3.8V-16V
- Small size (0.80" x 1.20")
- Ships with a 6" 6-pin cable and a 6-pin header
|
|
