|
These are boards that expand the capabilities of several of our FPGA/CPLD boards.
|
|
|
Voltage Regulator Module
- 6A synchronous step down switcher
- Selectable 5V or 3.3V output voltage
- Input voltage range of 5-15V
- 479kHz internal switching frequency
- Switching synchronization to an external clock
SMSC EVB-USB3300-XLX USB Daughter Card
- SMSC USB3300 USB Transciever
- USB-IF "Hi-Speed" Certified
- Supports 480 Mbps High Speed (HS) and 12 Mbps Full Speed (FS) and 1.5 Mbps Low Speed (LS) Serial Data Transmission Rates
- Includes Probe Points on All Data and Control Signals for Troubleshooting
Video Decoder board
- Decode NTSC/PAL/SECAM video sources
- Composite, component, and S-Video inputs
- Ideal for video & image processing experiments
FX2 Module Interface Board
- Provides 6 additional PMOD connectors (four 12-pin and two 6-pin)
- Based on the Hirose FX2 peripheral board connector
- Access to signals for test points
- Provision for oscillator for clock input to system board
FX2 Breadboard
- Two 640 tie point breadboards separated by a 100 tie point bus strip
- Four 6-pin male header connectors for connection to Digilent Pmods or system boards.
- Four 6-pin female header connectors for connection to Digilent Pmods
- FX2 socket connector for connection to Digilent system boards
FX2 Wirewrap
- A 32x65 hole wire wrap area
- Four 6-pin male header connectors for connection to Digilent Pmods or system boards
- Four 6-pin female header connectors for connection to Digilent Pmods
- FX2 socket connector for connection to Digilent system boards
|
