Digilent
 
Products
Support
Classroom
Services
Showcase
About Us
My Cart
  NOTE: Digilent will be closed Nov. 27th & 28th for Thanksgiving. Orders received after noon PST on the 26th will be processed on December 1st.  
Products
Enter a value code:




$419.00
$230.00
Currently in stock
Atlys™ Spartan-6 FPGA Development Board

410-178P-KIT
IC:
Xilinx Spartan®-6 LX45 FPGA in a 324-pin BGA package
Connector(s):
One Vmod™ (high-speed VHDC) connector
One 12-pin Pmod™ connector
One RJ-45 connector for 10/100/1000 Ethernet PHY and RS-232 serial
Two HDMI video input ports & two HDMI output ports
Two on-board USB2 ports for programming & data transfer
AC-97 audio with line-in, line-out, mic, & headphone
Programming:
JTAG programming interfaces compatible with Xilinx's iMPACT™ and Digilent Adept™
  • Xilinx Spartan-6 LX45 FPGA, 324-pin BGA package
  • 128Mbyte DDR2 16-bit wide data
  • 10/100/1000 Ethernet PHY
  • On-board USB2 ports for programming & data transfer
  • USB-UART and USB-HID port (for mouse/keyboard)
  • Two HDMI video input ports & two HDMI output ports
  • AC-97 Codec with line-in, line-out, mic, & headphone
  • Real time power monitors on all power rails
  • 16Mbyte x4 SPI Flash for configuration & data storage
  • 100MHz CMOS oscillator
  • 48 I/O’s routed to expansion connectors
  • GPIO includes 8 LEDs, 6 buttons, & 8 slide switches
  • Ships with a 20W power supply and USB cable
The Atlys circuit board is a complete, ready-to-use digital circuit development platform based on a Xilinx Spartan 6 LX45 FPGA. The on-board collection of high-end peripherals, including Gbit Ethernet, HDMI Video, 128Mbyte DDR2 memory array, audio and USB ports make the Atlys board an ideal host for complete digital systems built around embedded processors like Xilinx’s MicroBlaze. Atlys is fully compatible with all Xilinx CAD tools, including ChipScope, EDK, and the free WebPack, so designs can be completed with no extra costs.

The Spartan-6 LX45 is optimized for high-performance logic and offers:
  • 6,822 slices each containing four 6-input LUTs and eight flip-flops
  • 2.1Mbits of fast block RAM
  • 4 clock tiles (8 DCMs & 4 PLLs)
  • 6 phased-locked loops
  • 58 DSP slices
  • 500MHz+ clock speeds
The Atlys board can be communicated with and programmed by the Digilent Adept software. In addition, the board can be programmed by Xilinx's iMPACT using the Digilent Plugin for Xilinx Tools.

The required USB-UART driver is available for free download from Exar.

Linux developers: The Atlys board is supported by PetaLinux SDK for an out-of-the-box embedded Linux solution.





Related Products:

More Info
$139.00
More Info
Currently in stock
VmodTFT - Color LCD Touchscreen
  • Connects to system boards with a VHDCI connector (Genesys, Atlys, ...)
  • 4.3” color TFT LCD with resistive touchscreen
  • 480×272 resolution, 24bpp color depth
  • LED backlight with PWM control
  • Includes on-board temperature sensor that can detect −40°C to 85°C

More Info
$87.00
More Info
Currently in stock
VmodCAM - Stereo Camera Module
  • Connects to system boards with a VHDCI connector (Genesys, Atlys, ...)
  • Contains two Aptina 2-megapixel CMOS sensors, spaced 63mm apart
  • 1600x1200 maximum resolution at 15 FPS
  • 10-bit raw color depth

More Info
$46.00
More Info
Currently in stock
VmodBB - VHDC Breadboard
  • Connects to system boards with a VHDCI connector (Genesys, Atlys, ...)
  • Two 32 pin breadboards with 16 pins each, connected directly to signals from the system board
  • Two power and one ground bus around
  • Prototype connections on every signal
  • Ships with two 300 tie point breadboards separated by a 100 tie point bus strip

More Info
$35.00
More Info
Currently in stock
VmodWW - VHDC Wirewrap
  • Connects to system boards with a VHDCI connector (Genesys, Atlys, ...)
  • 33x17 hole wire wrap area
  • 32 plated through-holes connected directly to signals from the system board
  • Two power and one ground bus around
  • Prototype connections on every signal



Support Documents:

Doc # Date Categories Description  
500-178 10/18/10 Product Documentation Atlys schematics Download
502-178 1/21/14 Product Documentation Atlys reference manual. Download
DSD-0000281 10/18/10 Reference Designs Master UCF File for Atlys Download
DSD-0000283 11/18/10 Product Documentation Data sheet for VHDCI plug that provides pinout and dimension specifications Download
DSD-0000284 11/18/10 Product Documentation Data sheet for VHDCI receptacle that provides pinout and dimension specifications Download
DSD-0000290 12/17/10 Demonstration Project Source code for Atlys Demo/BIST configuration (factory loaded into SPI Flash) Download
DSD-0000291 12/17/10 Demonstration Project Source code for Atlys DDR2 and SPI Flash memory controller configuration Download
DSD-0000292 12/17/10 Firmware Built binary image for Atlys_Demo_BIST. This can be used to restore the original factory image in the Atlys SPI Flash. To reprogram, use the Flash tab in the Adept Application. Download
DSD-0000323 11/28/11 Demonstration Project This demo project is for the VmodTFT and either the Nexys3 or the Atlys. It continuously samples the VmodTFT's touch panel for X, Y and pressure values and lights up the pixels touched. Download
DSD-0000325 12/13/11 Demonstration Project This zip file contains an EDK demo project that illustrates how to use the AC97 codec on the Atlys board with Microblaze. Download
DSD-0000326 8/06/13 Demonstration Project This zip file contains an EDK demo project that demonstrates using HDMI on the Atlys board. It accepts an HDMI input, buffers the input frames into memory, and then outputs the buffer to another HDMI port. This is implemented using PLB bus. Download
DSD-0000327 12/13/11 Demonstration Project This zip file contains an ISE demo project that demonstrates the use of general I/O and UART on the Atlys board in VHDL. Download
DSD-0000332 9/14/12 Reference Designs Atlys board support files for EDK BSB wizard. Supports EDK 13.2 - 14.7 for both AXI and PLB buses. Download
DSD-0000419 5/07/13 Demonstration Project This zip file contains an EDK demo project that illustrates how to host a web server on the Atlys. It was built using EDK 14.3. Download
Digilent, Inc.    |    P.O. Box 428 Pullman, WA 99163-0428    |    (509) 334-6306 (voice)    (509) 334-6300 (fax)    |    Contact us