Digilent
    
Products
Support
Classroom
Services
Showcase
About Us
My Cart
Products
Enter a value code:




$26.95
Currently in stock
chipKIT Uno32™ Prototyping Platform

410-209P-KIT
IC:
Microchip® PIC32MX320F128
Programming:
Application development using an environment based on the original Arduino™ IDE modified to support PIC32 that also still supports the original Arduino™ line. Compatible with many existing Arduino™ code examples, reference materials and other resources.

To download the IDE, please visit: http://www.chipkit.net/started
  • Microchip® PIC32MX320F128 processor
    • 80 Mhz 32-bit MIPS
    • 128K Flash, 16K SRAM
  • Compatible with many existing Arduino™ code examples, reference materials and other resources
  • Can also be programmed using Microchip's MPLAB® IDE (along with a PICkit 3 and our PICkit3 Programming Cable Kit, seen below)
  • Arduino™ "Uno" form factor
  • Compatible with many Arduino™ shields
  • 42 available I/O
  • User LED
  • Connects to a PC using a USB A -> mini B cable (not included)
The chipKIT™ Uno32™ is based on the popular Arduino™ open source hardware prototyping platform but adds the performance of the Microchip PIC32 microcontroller. The Uno32 is the same form factor as the Arduino™ Uno board and is compatible with many Arduino™ shields. It features a USB serial port interface for connection to the IDE and can be powered via USB or an external power supply.

The Uno32 board takes advantage of the powerful PIC32MX320F128 microcontroller. This microcontroller features a 32-bit MIPS processor core running at 80Mhz, 128K of flash program memory and 16K of SRAM data memory.

The Uno32 can be programmed using an environment based on the original Arduino™ IDE modified to support PIC32. In addition, the Uno32 is fully compatible with the advanced Microchip MPLAB® IDE and the PICKit3 in-system programmer/debugger.

For additional platform-specific support for your chipKIT, please visit: http://www.chipkit.org/forum/.





Related Products:

More Info
$115.00
More Info
Currently in stock
chipKIT™ Starter Kit
  • Full-featured parts kit designed for use with our chipKIT™ microprocessor boards
  • Perfect for beginners or experts
  • Parts carefully chosen to facilitate interesting projects in multiple disciplines

More Info
$37.99
More Info
Currently in stock
chipKIT Basic I/O Shield™
  • Usable with either the Uno32™ or the Max32™
  • 256Kbit I2C EEPROM
  • 128x32 pixel OLED graphic display
  • I2C temperature sensor
  • I2C daisy chain connector
  • 4 open drain FET drivers
  • Analog potentiometer
  • 4 push buttons & 4 slide switches
  • 8 discrete LEDs

More Info
$29.99
More Info
Currently in stock
chipKIT Motor Shield
  • Usable with the Uno32™ or the uC32™
  • 2 DC motor driver channels, accessible with either a JST 6-pin connector or a terminal block
  • 2 DC motor encoder input signals for each DC motor channel
  • 4 servo motor channels
  • I2C General purpose I/O expander with 4 LEDs 2 push buttons and 2 user settable jumpers
  • 1 4-wire unipolar stepper motor channel

More Info
$12.99
More Info
Currently in stock
Protoshield for the chipKIT Uno32
  • Perfect for creating your own shield board
  • Pin compatible with chipKIT UNO32
  • On-board 5 Volt power LED
  • On-board MCU reset button
  • Two selectable power busses located in center of board for ease of wiring your project
  • DIY configurable - load only the parts you want

More Info
$26.99
More Info
Currently in stock
chipKIT PGM Programmer/Debugger
  • Provides in-system programming and debugging for Microchip PIC-based microcontroller boards
  • Intended for use with the chipKIT MX3, Max32, Uno32, and uC32
  • Designed to work with the MPLAB® and MPLAB® X development environments available from Microchip
  • Can also be used to enable in-system debugging of sketches developed using the Arduino™-compatible MPIDE development environment
  • Comes with a USB A-MiniB cable and a right-angle 6 pin header

$4.19
Currently in stock
USB A to mini B cable
  • Nearly 5 feet in length
  • Part# 310-054P



Support Documents:

Doc # Date Categories Description  
500-209 6/16/11 Product Documentation chipKIT™ Uno32 schematics Download
500-209-C 8/06/12 Product Documentation chipKIT™ Uno32 schematics (REV.C) Download
502-209 3/22/12 Product Documentation chipKIT™ Uno32 reference manual   (REV.B) Download
502-209-C 2/14/13 Product Documentation chipKIT™ Uno32 reference manual   (REV.C) Download
DSD-0000299 5/11/11 Demonstration Project Open source EAGLE project for the chipKIT Uno32. Created in EAGLE v5.11 Download
DSD-0000299-C 8/06/12 Demonstration Project Open source EAGLE project for the chipKIT Uno32. Created in EAGLE v5.11 (REV.C) Download
DSD-0000302 6/16/11 Product Documentation This document describes the functionality of the jumpers on the chipKIT™ Uno32™ board. Download
DSD-0000304 7/22/11 Product Documentation chipKIT™ Uno32 pinout table (.xls format) Download
DSD-0000312 8/26/11 Firmware chipKIT™ Bootloader Image loaded into the Uno32's PIC32 microcontroller at the factory. Download
DSD-0000319 5/13/14 Product Documentation This zip file contains libraries and documentation for using the PmodOLED with the MPIDE for chipKIT boards. Download
DSD-0000341 1/25/12 Product Documentation Programmer's Reference Manuals for the Digilent chipKIT DSPI and SoftSPI libraries for use with the chipKIT MPIDE software system. Download
DSD-0000342 1/25/12 Demonstration Project This simple example sketch for MPIDE blinks an LED on supported chipKIT boards. Download
DSD-0000367 4/19/12 Demonstration Project This zip file contains board variant files to add MPIDE support for the chipKIT Uno32 + Pmod Shield-Uno. Download
DSD-0000378 8/06/12 Product Documentation This document describes the procedure for programming the boot loader into a chipKIT board. Download
Digilent, Inc.    |    P.O. Box 428 Pullman, WA 99163-0428    |    (509) 334-6306 (voice)    (509) 334-6300 (fax)    |    Contact us