Digilent
    
Products
Support
Classroom
Services
Showcase
About Us
My Cart
Products
Enter a value code:




$180.00
$140.00
Currently in stock
Nexys™2 Spartan-3E FPGA Board

410-134P-KIT / 410-134P-12-KIT
IC:
Xilinx Spartan-3E FPGA, 500K or 1200K gates (Click “Add to Cart” to select gate size.)
Anaog Devices ADM3232EARNZ RS-232 Line Driver/Receiver
Connector(s):
USB2 Port
Hirose FX2
Four 12-pin Pmod connectors
VGA, PS/2, and serial ports
Programming:
Digilent USB2 port providing board power, programming, and data transfers
  • Xilinx Spartan-3E FPGA, 500K or 1200K gate
  • USB2 port providing board power, device configuration, and high-speed data transfers
  • Works with ISE/Webpack and EDK
  • 16MB fast Micron PSDRAM
  • 16MB Intel StrataFlash Flash R
  • Xilinx Platform Flash ROM
  • High-efficiency switching power supplies (good for battery-powered applications
  • 50MHz oscillator, plus a socket for a second oscillator
  • 75 FPGA I/O’s routed to expansion connectors (one high-speed Hirose FX2 connector with 43 signals and four 2x6 Pmod connectors)
  • All I/O signals are ESD and short-circuit protected, ensuring a long operating life in any environment.
  • On-board I/O includes eight LEDs, four-digit seven-segment display, four pushbuttons, eight slide switches
  • Ships in a DVD case with a high-speed USB2 cable
The Nexys-2 is a powerful digital system design platform built around a Xilinx Spartan 3E FPGA. With 16Mbytes of fast SDRAM and 16Mbytes of Flash ROM, the Nexys-2 is ideally suited to embedded processors like Xilinx's 32-bit RISC Microblaze™. The on-board high-speed USB2 port, together with a collection of I/O devices, data ports, and expansion connectors, allow a wide range of designs to be completed without the need for any additional components.

Now everyone can own a powerful, state-of-the-art development system for less than the cost of a textbook!

Note: In order to program and communicate with the Nexys 2 board, you must download and install the free Digilent Adept software.







Related Products:

More Info
$270.00
$139.00
More Info
Currently in stock
Nexys™3 Spartan-6 FPGA Board
  • Xilinx Spartan®-6 FPGA
  • Intended for use with ISE, Webpack, or EDK
  • Digilent USB2 port providing board power, programming, & data transfers
  • 16MB Micron Cellular RAM, 16MB Micron Parallel PCM, 16MB Micron Quad-mode SPI PCM

More Info
$54.95
More Info
Currently in stock
Digital Design, 2nd Edition
  • Your choice of either VHDL or Verilog version
  • A full textbook designed to guide newcomers from the basics all the way through to advanced concepts
  • Uses 75+ examples to teach advanced digital design
  • Designed around the Digilent Nexys2 and Basys boards
  • Written by professors Richard E. Haskell & Darrin M. Hanna
  • Price shown is for the book only. Add to cart to bundle with an FPGA board for a discount

More Info
$39.95
More Info
Currently in stock
Introduction to Digital Design
  • Your choice of either VHDL or Verilog version
  • Created for beginners using a block-diagram approach with Active-HDL
  • Uses 30 examples to teach digital design fundamentals
  • Designed around the Digilent Nexys2 and Basys boards
  • Written by professors Richard E. Haskell & Darrin M. Hanna
  • Price shown is for the book only. Add to cart to bundle with an FPGA board for a discount



Support Documents:

Doc # Date Categories Description  
502-134 Product Documentation Nexys2 reference manual Download
DSD-0000110 7/19/07 Product Documentation Nexys2 schematic diagrams Download
DSD-0000206 6/05/08 Demonstration Project Nexys2 Board verification Project - (for 500K boards) Download
DSD-0000207 6/05/08 Demonstration Project Nexys2 Board verification Project - (for 1200K boards) Download
DSD-0000208 9/21/11 Nexys2 Board Support files for use with Xilinx EDK. Supports EDK 13 and up. Download
DSD-0000215 1/15/13 Master UCF file for the Nexys2-500 Download
DSD-0000216 1/15/13 Master UCF file for the Nexys2-1200 Download
DSD-0000232 4/20/09 Reference Designs Active Power Meter reference design Download
DSD-0000233 4/20/09 Reference Designs BRAM Configuration reference design Download
DSD-0000234 4/20/09 Reference Designs PS2 Mouse Control reference component Download
DSD-0000235 4/20/09 Reference Designs PS2 Mouse Displayer reference component Download
DSD-0000236 4/20/09 Reference Designs Onboard Memory controller reference design Download
DSD-0000238 4/20/09 Reference Designs RS232 interface reference component Download
DSD-0000239 4/20/09 Reference Designs Pulse-width modulation reference component Download
DSD-0000240 4/20/09 Reference Designs RS232 example reference design Download
DSD-0000241 4/20/09 Reference Designs VGA controller reference design Download
DSD-0000260 5/15/09 Reference Designs Adept I/O expansion reference design Download
DSD-0000270 12/07/09 Reference Designs EDK project that demonstrates how to connect the BSB shared buses through I/O multiplexers, allowing access to both RAM and FLASH memories on the Nexys2-500. Made using EDK 11. Download
DSD-0000271 Reference Designs EDK project that demonstrates how to connect the BSB shared buses through I/O multiplexers, allowing access to both RAM and FLASH memories on the Nexys2-1200. Made using EDK 11. Download
Digilent, Inc.    |    P.O. Box 428 Pullman, WA 99163-0428    |    (509) 334-6306 (voice)    (509) 334-6300 (fax)    |    Contact us